← All themesWhistledemo store← TumbleProof→Start free trial

Cut to the neck, not to a size.

Collars and leads stitched by hand from bridle leather, made to the centimetre for one dog. Say the neck, pick the leather, choose the brass.

See collars and leads
Start with the neck

Measure the neck first

Neck
A soft tape where the collar sits, snug, not tight. Two fingers should slide under it. That number, in centimetres, is what we cut to
Width
15 mm for a neck under 30 cm, 20 mm for most dogs, 25 mm over 45 cm. Wider spreads the pull
Puppies
Measure now and say the breed. A puppy collar is cut with extra holes and comes back to be re-punched, free, for a year
Leads
120 cm for town, 180 cm for the park, and any length between on request
Hardware
Solid brass or stainless steel, no plating to wear off. Brass darkens with age and is meant to

Collars and leads

Collar, tan bridle

Collar, tan bridle

from €38.00

Material
Bridle leather, 20 mm
Size
Cut to a neck of 30 to 45 cm
Made in
Ghent, Belgium
Collar, red bridle

Collar, red bridle

from €42.00

Material
Bridle leather, 25 mm
Size
Cut to a neck of 40 to 55 cm
Made in
Ghent, Belgium
Collar, black and red

Collar, black and red

from €42.00

Material
Bridle leather, 25 mm
Size
Cut to a neck of 40 to 55 cm
Made in
Ghent, Belgium
Lead, tan bridle

Lead, tan bridle

from €48.00

Material
Bridle leather, 18 mm
Size
150 cm, or any length you ask for
Made in
Ghent, Belgium
Lead, red bridle

Lead, red bridle

from €48.00

Material
Bridle leather, 18 mm
Size
150 cm, or any length you ask for
Made in
Ghent, Belgium

Asked at the park

What if it does not fit?

Send it back with the right number and it is re-cut or re-punched. A collar made to a measurement you gave is not returnable, but it is always adjustable.

Is the brass safe in the sea?

Yes. Brass and stainless do not rust. Rinse the collar in fresh water after salt and let it dry; the leather wants a little balm afterwards.

Can I have the name on it?

On the tag, stamped, up to twelve characters and a phone number on the back. Choose it on the configurator with the neck size.

Say the neck, we cut the rest

Type the neck in centimetres, pick the leather and the width, and choose brass or steel. The price shows as you go, and the collar is cut to that number with two holes either side of it.

1 Neck in cm2 Leather and width3 Hardware
Start with the neck

Nothing is riveted that can be sewn

A rivet is quick and it is the first thing to pull through when a dog lunges. Every buckle and every D-ring here is saddle-stitched by hand instead, two needles and one waxed thread, so a single broken stitch goes nowhere and the seam can be repaired rather than replaced.

It costs about twenty minutes a collar. It is the reason these last a decade and the reason there are three of them on the bench rather than thirty.

Rescues, kennels, a litter of eight.

Collars and slip leads by the dozen for a rescue, a boarding kennel or a breeder, in one colour with your name on the tag, at a price that drops past ten.

Ask about a batch

This is the Whistle theme with its demo content. Your own products, photographs and words replace all of it.

Every theme is on every plan, including Starter, and you can switch between them whenever you like.

Start free trialBack to all themes

14-day free trial · No credit card